english
Sealing
Install a tracker in a concealed part of your vehicle and it will submit its location data to GEO.RITM at a pre-defined time.
The Voyager 6N’s special ‘sleep’ operating modes will prevent thieves from quickly locating the device in your vehicle.
The small size of the tracker and its unobtrusive color enable you to make sure that it will be undetectable by visual inspection.
Additionally, its sealed casing allows the tracker to work in any appropriate location, where a GPS or GLONASS connection
is available. This makes it possible to install the tracker without using huge sealed compartments that unmask the device.
Whether your vehicle has been towed or stolen, you will easily find it in no time.
Fully independent
As the Voyager 6N does not require connection to onboard electrical circuitry, it can be easily installed on any vehicles:
- Expensive special vehicles;
- Private vehicles;
- Company vehicles (incl. premium class);
- Motorcycles and mopeds;
- Bicycles and scooters;
- Motorboats, yachts, schooners;
- Animal-drawn transport.
Provided that four CR123A batteries are installed,
the Voyager 6N will work for up to 2 years in beacon mode.
Simple installation
Special option - magnetic backing - plate simplifies device attachment to plain metal surfaces.
You only have to attach magnetic backing plate to the tracker,
and it's instantly ready for installation.
A significant force is needed to tear the tracker off the surface,
so you can be sure, it won't fall off by itself, even on a country road.
Compatibility
with any GoPro mount
Now you have even more options for simple installation
of the tracker: a backing plate with special mount allows you
to use GoPro accessories. GoPro action camera mounts are made for extreme conditions use.
Frame mounts allow quick and easy on-demand installation
of the tracker to ATV-vehicles (quad bikes, buggies, trikes, halftrack motorcycles and snowmobiles), boats, and PWCs.
Thanks to compact sizing, light weight, online operating mode, and simple mounting system, Voyager 6N — is an ultimate solution for all recreational athletes and sport event hosts.
Using as a tracker
Despite the fact that the Voyager 6N was originally designed as an independent ‘bug’, it can be used to provide detailed tracking
of movement and parking locations, simultaneously transmitting
the information to monitoring software, just as its older sibling,
the Voyager 4N does.
You should remember, however that using the device in this way increases energy consumption and renders it visible in the radio frequency range.
Speed and accuracy
The Voyager 6N uses a GPS/GLONASS receiver with a built-in antenna to precisely track its location. Thanks to its A-GPS function, positioning is done within seconds. If your car has been stopped in the open (if towed — at an outdoor parking lot, if stolen — in a backyard, on some abandoned site or a side road), you will easily track its location with an accuracy of a few meters.
Even if the thieves decide to hide your car in a garage or an underground parking area (where it would be outside satellite network coverage), the LBS makes it possible to track
the approximate location of a Voyager 6N enough to determine the area in which the stolen car had been parked.
The batteries are easy to change
CR123A power cells are widely popular, so finding them will never be hassle; you can easily buy and install them yourself.
When the battery charge begins to run low, the device informs
its owner that the batteries should be replaced. This means that the Voyager 6N is always prepared to handle any situation
or emergency.
Satellite positioning
| GPS | + |
| GLONASS | + |
| GPS/GLONASS antenna | internal |
Communicator
| GSM (CSD, GPRS) | 1 SIM-card |
| GSM antenna | internal |
Built-in sensors
| Motion sensor | + |
Electric power supply
| Runs on replaceable batteries | 2-4x3 V / CR123 type |
Interfaces
| Micro USB | + |
General specifications
| Non-volatile memory "black box" | Up to 57 890 points |
| Configuration via Micro USB | + |
| Board buttons | ‘Test’ |
| GPS tracker internal indicators | ‘GPS reception test’ |
Design
| Magnetic backing plate | optional |
| GoPro mount | optional |
| Sealed casing | IP67 |
| Dimensions without magnetic backing plate | 25x50x81 mm |
| Weight | 60 g |
| Operating temperature range (without regard to battery characteristics) | -40...+50 °Ñ |