english
Ritm Configure for Google Chrome
The Ritm company presents Ritm Configure, a special software tool for Google Chrome™, designed to simplify the equipment configuration procedure.
Ritm Configure is an application for Google Chrome capable of running on any operating system (except mobile platforms) that supports the Google Chrome web browser. It is designed to determine the appropriate configuration software for the device firmware in use and run it on your computer.
Ritm Configure recieves the configuration software applications it uses from from ritm.ru, which assures its reliability.
Ritm Configure stores the configuration software applications it uses on your computer’s local hard drive in a folder of your choice. In other words, configuring several devices with the same version of the firmware will only involve downloading the necessary configuration software once.
Ritm Configure is capable of loading all available configuration software versions for all kinds of devices. This enables it to configure a device without an active Internet connection.
If Ritm Configure cannot find the required configuration software in its local folder after connecting to a device, it will automatically proceed with downloading it from our website (this requires an Internet connection).
The benefits of using Ritm Configure:
- You can configure devices regardless of which version of your operating system you are using (Windows, Mac OS X, Linux, Chrome OS).
- You won’t have to waste your time searching for the appropriate version of the configuration software.
- You don’t have to worry about whether a particular version of the configuration software version will work with your version of the device firmware.
- You will not need an Internet connection to locally configure your equipment.
Please note! The files for updating the firmware are always downloaded from our website and are not stored locally. If you want to update your firmware using Ritm Configure, your PC must be connected to the Internet.
As of the release date of Ritm Configure, the following devices are supported:
| Contact | Voyager | Accessories |
| Contact GSM-2 | Voyager 2N | Wired touch keypad LCD KB2 |
| Contact GSM-5 RITM.LINK
| Voyager 2N Wi-Fi | Tilt/shock pick up sensor DST |
| Contact GSM-14 | Voyager 2N Light | Video Recorder R15
|
| Contact GSM-14 Wi-Fi
| Voyager 2N Light RS-485 |
|
| Contact 15 | Voyager 2N-T |
|
| Contact GSM-16 | Voyager 4N |
|
| Contact LAN | Voyager 5N |
|
|
| Voyager 6N |
|
|
| Voyager 15 |
|
Installing the application on your Google Chrome browser
In order to install the application, use Google Chrome to open the Google Web Store.
Add the application to Chrome.
It will then appear in your list of applications (Services section in the Favorites panel).
Working in the Ritm Configure application
To configure Ritm devices, first install any necessary drivers (if required) and then run Ritm Configure.
When you launch the application for the first time, define the folder, in which the application will store its work files.
Choose the type of connection to the device (according to the equipment and communication channel to be used).
If you are using a CSD connection, specify the COM port, to which the modem is connected, device SIM card phone number, and Master code (if required).
If you are using a USB connection, specify the COM port, to which the device is connected, and Master code (if required).
If you are using a direct connection to the device over TCP/IP, specify its IP address and port. If required, also specify the Master code.
Press the “Connect” button. This will download and open the device configuration software application.
If you need to download all of the configuration software applications, press the “Download configuration software for all devices” button.
